Shaanxi Fortune Industries Co.ltd
High Quality Bearing at the Good Price Experienced Staff Bearing in Variety Professional Service
Add to Cart
SI80ES Radial Spherical Plain Bearing Rod End Bearings
Design and features
Rod ends consist of a rod head and a spherical plain bearing. In the case of maintenance-requiring rod ends, the spherical plain bearing consists of the material combination steel/steel or steel/bronze. Regular maintenance and relubrication is therefore essential.
The rod end SI..ES ,SI..ES-2RS, SIL..ES require maintenance. They have a sliding contact surface combination steel/steel and are suitable for heavy static loads as well as for shock loads.
A joint bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint.
Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint isrequired. A ball swivel with an opening through which a bolt or other
attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be eithermale or female.
Rod End Bearing PHS10L mainly bear radial load, but also can withstand a certain amount of axial load which has little friction, high limiting speed, many type of size and forms. It's suitable for precision instruments, low noise motors, automobiles,motorcycles and general machinery, the machinery industry, the most common kind of bearing.
The Rod End is a spherical slide bearing incorporating a spherical inner ring with precision and hardness equivalent to that of steel ball bearings. It provides very smooth rotating and oscillating motion without play.
specifications
| Designations : | SI80ES , SI80ES-2RS | |
| d : | 80 mm | |
| B : | 55 mm | |
| dk : | 105 mm | |
| h1: | 295 mm | |
| α : | 5° | |
| Weight : | 19 KG | |
| Ring Material : | Chrome Steel | |
| Contact Surface : | Steel / Steel | |
| Sealed : | Open or 2RS | |
| Lubricant : | Requiring Maintenance | |
| Mounting: | Internal Thread (Right Thread) |
Material:
Rod end of steel and zinc coated, with male or female thread, spherical surface with bronze liner, inner ring of carbon chromium steel, spherical surface with chromium plating, can be lubricated via a nipple or a hole in the rod end. It has characteristics of large load capability, easy mounting and dismounting and mechanism simplification.
